Universal Dual Flush Toilet Parts 2 Or 1.5 Inch For Cistern Valve
- Steel wire operated duo flush valve.
- WRAS approved.
- Lengthened cable for easy installation.
- Endurable molded from ABS plastic.
- Heavy duty design.
- Easy to install, totally tool free.
- Leakage free silicone rubber flapper.
- Installation base available in both 2" and 1.5".
- High glossy chrome plated push button.
- Two types of push button for option.
- Adjustable overflow every 5mm.
- Soft hand feeling, less than 20N.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||370g +/- 3%|
|Installation height:||180mm (from the upper rim of gasket to the top)|
|Outlet size:||2" for 2-pc toilet|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||90 degree|
|Seal washer:||4mm for plastic concealed cistern|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button:||Compatible with lid hole dia. 18mm-50mm|
|Push button installation:||could be top / side / front mounted|
|Cable length:||400mm for British concealed cistern|
Universal dual flush toilet parts P0708BK is a compatible dual
flush valve for British concealed cistern which is placed inside
the bathroom cabinet. It's fully customized for this kind of
application. Every small details are taken into consideration:
- The length of the cable is increased to 400mm which is enough for
normal installation, while the standard one is 300mm for close
- The seal washer is customized at thickness of 4mm as the plastic
cistern wall thickness is much smaller than that of the ceramic
- One and half inches base is available except standard two inches
- Push button has a special lock nut for plastic cistern.
Push buttons for option: