One Piece Toilet Flush Valve With Adjustable Dual Flush System
- Endurable molded from ABS and POM raw material.
- Dual action for water saving.
- Anti-leakage silicon rubber seal.
- Gentle touch hand feeling.
- Powerful rinsing flow(2.3L/s).
- Overflow pipe height customized per order.
- Suitable for one piece sanitary ware W.C.
- Piece by piece inspection before packing.
One piece toilet flush valve P0801A is a cylinder dual flush valve
for 1-pc W.C. The installation height is 250mm including the
sealing gasket. It can fit toilet cisterns from 280mm to 360mm. The
fasten parts of the base is in solid stainless steel including
beam, hook and screw. This enforces structure is more reliable and
effective than that of plastic three-jaw base. The latter tend to
break if you tighten it too hard in flush valve installation, easy
to wear out through years and reduce the power of flush flow. All
our dual flush valve of the new seires are designed with enforced
one piece base structure.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||250mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||280mm - 360mm|
|Outlet size:||2" for 1-pc toilet|
|Flushing rate:||>=2.3 Liters per seconds|
|Overflow pipe:||Fixed height customized per requirements|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|