Water Saving Dual Flush Toilet Valve For 1-Pc Duo Flush Toilet
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||250mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||280mm - 360mm|
|Outlet size:||2" for 1-pc toilet|
|Flushing rate:||>=2.3 Liters per seconds|
|Overflow pipe:||Fixed height customized per requirements|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
Water saving dual flush toilet valve P0801A is a popular one piece
flush valve for sanitary ware toilet. This series are designed with
concept of heavy duty for middle to high end market: thick
material, solid stainless steel hook, stainless steel fasten
bracket, lengthened locking screw. The average length of the base
screw is about 30mm. This model is fitted with 60mm screw, double
of the standard length. It is workable for almost every model of
one piece sanitary ware toilet with 2 inches discharge hole.
Injection molded from ABS and POM raw material.
Duo flush option for water saving.
Anti-leakage silicon rubber seal.
Initiate force only 11N.
Flush rate could reach 2.3L/S
Overflow pipe height customized per order.
Suitable for one piece sanitary ware W.C.
Piece by piece tested before shipment.
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.
Founded in 2007, Xiamen Xinnin Sanitaryware Technology Co., LTD is
devoted to providing best sanitary fittings and related solutions
to our valued customers. After 10 years of hard working and
continues improvement, Xinnin has become one of leading
manufacturers in the industry. We have the best raw material
source, high-tech mold design, automatic production facilities and
in-house inspection equipments. What’s more important, we have an
experienced and ambitious team of R&D, QC and management.