One Piece Toilet Flush Valve For Low Flush Toilet With Duo Action
- Larger adjustable scope for full and partial flush.
- Made from strong high quality plastic material complied with ROHS.
- Heavy duty design.
- Easy to install, totally tool free.
- Overflow pipe height customized per order.
- Soft hand feeling, less than 20N.
- Flush rate could reach 3.0L/S.
- Easy access for maintenance.
- 100% responsible for quality.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Outlet size:||2" for 1-pc toilet|
|Flushing rate:||>=2.3 Liters per seconds|
|Overflow pipe:||Fixed height customized per requirements|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
One piece toilet flush valve P0709A is for one piece sanitary ware
toilet. the installation height is 200mm from the upper rim of the
sealing gasket to the top of the flush body. our dual flush valve
are fitted with high grade silicon rubber flapper. each batch of
the silicon flapper has to pass rigid tests including stretching,
aging, temperature and deforming one month ahead of assembly at
least. no defected material will be accepted and no compromise is
made for critical parts.
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.