Universal Cable Operated Dual Flush Valve , Button Fit Hole Dia.
18Mm To 58Mm
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||370g +/- 3%|
|Installation height:||180mm (from the upper rim of gasket to the top)|
|Outlet size:||one and half inch for 2-pc toilet|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||90 degree|
|Seal washer:||4mm for plastic concealed cistern|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button:||Compatible with lid hole dia. 18mm-50mm|
|Push button installation:||could be top / side / front mounted|
|Cable length:||400mm for British concealed cistern|
- Cable operated for high and low cistern.
- WRAS approved.
- Lengthened cable for easy installation.
- Leakage free silicone rubber flapper.
- Fit button hole dia. 18mm to 58mm.
- High glossy chrome plated push button.
- Residual water could be adjusted.
- Soft hand feeling, less than 20N.
- Piece by piece inspection before packing.
Universal cable operated dual flush valve P0703BK is a cable dual
flush valve with a button dia. 58mm which could actually used for
toilet cistern hole from 18mm to 58mm. It’s the most universal
flush valve in our range. Compared with regular 38mm button, it’s
fitted with an extra cover plate dia. 58mm. It can cap the gap
between the button body and the lid hole rim when the hole diameter
is bigger than 38mm.
Push buttons for option: