Cable Operated Dual Flush Valve 1.5 Inch , Stable Operation Design
Cable operated dual flush valve P0703BK is designed with concept of
stable operation structure. The cable flush valve relies on the
wire to convey the movement of flush flapper. The wire includes an
internal stainless steel wire and outside plastic tube. As
stainless steel wire will extend in hot temperature and contract in
cold temperature per nature quality. It’s critical to find ways to
absorb the length difference caused by temperature change otherwise
the partial flush and the full flush will be confused. Our cable
operated dual flush valve is equipped with such a stable converter
box which is compatible with the length difference under
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||370g +/- 3%|
|Installation height:||180mm (from the upper rim of gasket to the top)|
|Outlet size:||1.5" for 2-pc toilet|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||90 degree|
|Cable length:||400mm for British concealed cistern|
|Push button:||Compatible with lid hole dia. 18mm-50mm|
|Push button installation:||could be top / side / front mounted|
|Seal washer:||4mm for plastic concealed cistern|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
- Steel wire operated duo flush valve.
- WRAS approved.
- Lengthened cable for easy installation.
- Endurable molded from ABS plastic.
- Heavy duty design.
- Flush rate could reach 2.3L/S
- Leakage free silicone rubber flapper.
- Installation base available in both 2" and 1.5".
- High glossy chrome plated push button.
- Initiate force only 11N.
- 100% tested before shipment.
Push buttons for option: